Wednesday, July 31, 2013

messing about in boats

Last fall, Ian and Mark and I bought a boat from a co-worker of mine. The way he talked about the motor -- a little old, but barely used; it just hung on the wall -- made me think we were getting a good deal on a great boat. The guy is a real dealer -- he said once he doesn't own anything he wouldn't sell for the right price -- and while I don't feel cheated at all, I did admire his salesmanship. Maybe the motor was barely used. I just know when I first saw it, it was older than I'd imagined, and there were a lot of leaves under the cowling, and grease, and pieces broken off the cast aluminum frame. 
My co-worker motored down from the other shore and took us for a ride. He opened the throttle and leaned the gunnel deep into a turn. It made us children again, so we bought the boat, for $233 each.
We took it out exactly twice last fall. On the first outing, I broke the tiller. For a while, we weren't sure how it happened. Then I remembered my co-worker's warning about catching the tiller on the stern seat when you tip the propeller into the water, words that must have meant little to me before I knew how to clamp the motor to the transom. By pushing the tiller to one side (to engage the throttle rods) and steering with the other hand, Ian and I were able to joyride, but it was bittersweet. A welder tried to reattach the broken ring, but the aluminum had too much molybdenum to weld, so we braced it with a thick washer, some tiny screws, and epoxy. On the second trip, the gas we thought we had in the tank turned out to be mostly ice and water, although it took us a while to figure that out, too. Luckily, we had motored upstream. We paddled back. We debated whether or not a floating boat moves the same speed as the current.
A note about our boat: She's 12 feet long, three feet at the beam, and flat-bottomed. The freeboard is maybe 17 inches, and the rated capacity is about 500 pounds (although we hope to hunt moose with her). The boat is designed for a motor up to 7 hp.
Our motor is a 1969, 25-horse Evinrude, which apparently was the go-to motor on the Yukon in its day. Although it's known for its power-to-weight ratio, the motor weighs nearly as much as our boat. To support it, we beefed up the transom with steel plate and all-weather plywood.
The boat was made by Monark, so we named her the Ark.
We took her out again last night. Ian and I tried to go Sunday, but spent a few hours yanking the pull cord, futzing with the choke and fuel mix, and watching her sputter to life and die out over and over again. An old guy from the Lower 48 tried to help, and while we figured out later he didn't know a damn thing -- what he thought was a priming pump was actually the kill switch -- his poking around helped us learn a few things, like how the cam works the throttle. We had to move when some guys wanted to shoot golf balls off the deck of the bar whose dock we were using.
That night, I read about old Evinrudes in online chat forums. On Monday, I went to the boat shop and got some advice and carb cleaner, and after work, Mark and Ian and I took apart the motor -- part of it, anyway. We checked the fuel pump for leaks and a fuel line for cracks. We disconnected the fuel mix linkage, choke, throttle, and fuel line, removed the carburetor, and unscrewed the bowl from the lid. Our experience with carburetors was mixed. Ian had once been shown how to disassemble and clean the carburetor of a VW bug. I've always been too scared of the delicate pins and calibrated floats to open my motorcycle carburetor. Mark had cleaned the carb on a lawnmower once -- he spit in it and wiped it with his t-shirt.
The second we opened the carburetor, our problem was clear. Waxy gum filled a whole section of the bowl and lid. It was the most likely problem -- the Occam's razor of boat motors -- and with hindsight, completely predictable given how we'd left the motor over winter. I think it was a combination of frustration and forgetting that led us, after trying to run the motor on ice water, to put it away without running fuel stabilizer through it or even running it dry to get the water out of the shaft. (Nor did we grease the drive parts, before or after winter.) 
We scrubbed the carburetor with Ian's toothbrush, cleaned the choke lever, and wiped out some leaves and grease, then tested her with the prop in a tote of water. She ran! We experimented with fuel mix (the numbers on the knob don't make any sense), then shifted into gear and churned water into froth with the prop. When we shut it off, Mark realized there wasn't any cooling water getting to the motor -- we didn't have the prop deep enough. There was smoke coming out a hole in the shaft. We figured it was fine. I thought about filing smooth the dents in the prop, but didn't.
Last night, Ian and I slid the Ark into the Chena. The motor started on the third pull, rough at first, then smoother. We powered upstream, carving turns in the water, high-fiving, squinting into the sun. We slowed to tame our wake for floaters. I scanned the water for hints of shallow ground and hugged the outside around bends. And then we hit. The prop must have been pushed to the side, because the boat curved sharply, once and back, and for a second I thought we were going in. The prop ground against the bottom. I knew from canoeing it was shallow there, but had forgotten, or let it go when I couldn't see signs on the surface. (We saw them later.) Something sounded bad, so we cut the motor and went to shore. We couldn't figure out how to get the prop off, so we pulled the boat to deeper water and tried again. It sounded okay. We hit bottom a few more times. The prop was chipped and chewed, but still moved us along. It occurs to me now that learning to read the river will be harder than learning to fix the motor. As it should be.
We probably draw a foot of water on step. At low speed, the boat stays flat. Add some gas and it tilts up, plowing through the water and pushing the prop a few inches lower. Add more gas and it starts to plane again. We met up with Mark, and he hit bottom. He pegged the throttle. We debated whether or not the Ark could tow a waterskier.
On the way back downstream, Ian wanted to try the extreme setting for the angle of the prop, a few degrees off where we had it. I said I couldn't remember, but thought it might have been where it was for a reason. I drove. The boat seemed less willing to plane, and the steering seemed slower. Ian tried it. At full throttle, the boat began to level out. It rocked, and then the bow started to jump and crash on imaginary swells. We couldn't steer, and for a second I thought we might crash into a much-nicer boat docked on shore. Ian cut the gas and steered away. We switched back to the old setting. He didn't have sunglasses, so I drove. When trees blocked the sun, goosebumps covered my arms. I went fast. The boat steered effortlessly, and the motor ran smooth.

Tuesday, July 2, 2013

sluicebox 100

It's Tuesday and my body is just starting to feel better. 
This weekend, Mark and I did the Sluice Box 100, a 100-mile adventure race that zig-zags around Fairbanks. You can bike it, run it, or do it as a relay race with up to five people. As luck had it, Mark and I ended up as the only two-man foot team. (All other foot teams had five.) 
If I remember right, we decided to do this after I proposed to Mark this spring that we walk 50 miles. I'd read -- in a fun story about walking -- of an indirect challenge from John F. Kennedy in 1963:
. . . Kennedy had wondered aloud whether Marines of the day could carry out Theodore Roosevelt's order of 1908 to march 50 miles in three days.
"The big surprise was the reaction of the American people," reported Newsweek. "With one idle remark, Mr. Kennedy put more vigor into Americans than his Council on Physical Fitness had done in six and a half years of preachment. Citizens of all ages and conditions, mostly flabby, went after the 50-mile mark in one of the woolliest pursuits since men first chased wild geese." 
Boy Scouts hiked in Illinois. Secretaries sauntered in Washington. Politicians chased headlines and reporters tailed along. The president's brother, Robert, finished a 50-mile walk. . . .  
For some reason, I pictured men walking in leather-soled dress shoes. I imagined painful blisters, and mental fortitude overcoming lack of fitness. I figured Mark and I could pack a lunch and walk dirt roads around town, never too far from a car pickup if we needed it. Mark proposed instead that we do the Sluice Box, 100 miles up and down Fairbanks' highest hills, through swamps, and over rooted, buggy singletrack.
Which is not to say I hadn't dreamed of running an ultra. Studying abroad in Australia and New Zealand, I reveled in long trail runs, gliding over terrain hikers took days to cross. One of my first journalistic endeavors was to review Dean Karnazes' Ultramarathon Man, in which he describes all-night training runs, mountainous and sweltering-hot ultras, runs of 200 and 300 miles. And a few years ago, I paced a friend for the last 10 miles of his first ultra. I just never felt strong enough to do one myself.
As the Sluice Box approached and the opportunity for preparation faded away, I felt a mix of worry and excitement. Last fall, after a long training run of 9 miles, I ran most of the Equinox Marathon and only got stronger at the end -- knee problems be damned! So despite being limited to about 7 miles in training this summer, I still half-believed I would, by some miracle, run 50 miles on race day.
At 7 am Saturday, I took off running. I walked the steep hills and probably never topped 9-minute miles, but I ran. Halfway through my first leg of 23 miles, my knee started to hurt. I stretched. I walked. I watched the camber of each step. I ran more when it felt OK or the bugs got too bad, and I finished my first leg with an average of 12-minute miles. Then I waited. As Mark struggled through the hilly second leg, I bathed, ate, and kicked myself for believing in miracles. I walked my second leg, 29 miles with 5,000-plus feet of climbing and a few painfully steep downhills. I averaged more than 16 minutes a mile, walking fast with few stops for eight hours. Mark ran and walked through the night to finish the race. Four solo runners beat us, but more than that dropped out. Overall, we finished last.
So were we ultra runners or Boy Scouts? One thing that made Karnazes' book fun was his wonder at his own body. Testing one's limits is a goal of many athletes, but for Karnazes the challenge was elegantly simple -- how far can I run? And the answer was truly amazing. I'm not Karnazes, but I still wonder at our weekend feat. My body carried me 52 miles; I could have crossed the state of Vermont. Mark and I each climbed the elevation of the highest peak on the East Coast. The four who ran solo gained more elevation than a typical ascent of Denali -- and could almost have run to Denali Park from Fairbanks, in under 25 hours. It's impressive.
The Sluice Box is a laid-back affair, and prizes are few. But at the post-race party tonight -- pony kegs, babies, stories of recovery -- Mark and I were among those feted. For signing up, and for sticking it out. We won the red lantern. Looking around at the wiry men who'd beaten us by so many hours on foot and bike, I wondered if that's what we should be proud of -- falling somewhere between committed athletes and the average Joes inspired by Kennedy, and just making it happen. 
We were each given an hour's free massage.

Sunday, June 16, 2013

biking denali

This is a trip my friend Darcy has done a few times and recommended. Take an afternoon bus to the end of the Denali park road and ride back through the night. Any time near the summer solstice, you don't even need a headlamp. The sun sets for a few hours but it never gets dark. If you're lucky, the animals will come out; if you're really lucky, the mountain will be out. 
I asked Darcy's advice before we left. Bring lots of warm clothes and bundle up before the long descents, she said. Bring booties. Watch out for bears.
The park buses can only fit two bikes each, so Mark took a late-morning bus and Trystan and I took the 2 o'clock. Trystan and I had both visited the park before, and the six hours on an old school bus (average speed, 15 miles an hour) dragged a little, despite seeing "the big four" -- caribou, Dall sheep, moose, and bear. We were eager to get on our bikes. We'd spent most of the day in a car and a bus, and we had a 92-mile ride ahead of us.
The road ends at Kantishna, a cluster of impressive lodges and private residences on the banks of Moose Creek. Trystan and I downed some canned coffee, loaded up and took off, wondering if and when we might catch Mark. The clouds that had hung over Denali's peak disappeared, and the giant mountain dominated every view. By some luck, we'd picked the warmest, sunniest weekend of the year, just a week before solstice.
The hours and miles flew past. At 10 o'clock, I was still wearing sunglasses. We had ridden alongside the mountain (about 30 miles north of it), and now started to put it behind us. The road had all but cleared of traffic. Several friends had mentioned this trip, and our bus driver had exclaimed how popular it had become (park employees call bikers "meals on wheels" for grizzlies), but the road was hardly crowded with cyclists -- in our many hours out, we passed just two.
The road is rarely flat, so up and down we went, churning steadily uphill and flying fast down the gravel descents. Sometime before midnight, we slowed for a parked car with cameras stuck out the window. We soft-pedaled past as a good-sized grizzly, lying in the ditch, glanced up from his slumber. An hour later, I spotted another bear 300 yards off the road. He stood and faced me, watching as we snaked our way down a fast descent. Bad place to crash, or flat, I thought. Five seconds later, my rear tube was completely blown, the rim bouncing over the rock and dirt. Checking over our shoulders, we shuffled down the hill and pulled over by some heavy equipment. I imagined huddling inside as a grizzly bear pawed at the glass doors. I yanked the tire and swapped the tube and we were off.
We found Mark at the East Fork River, laid up with a broken spoke and nagging knee. We rallied, downed some more canned coffee, and set off together. Forty-three miles to go. I had felt tired for an hour -- sleepy, and a little fatigued -- but now my body woke again. We climbed to Sable Pass, at 3,900 feet. The sun had long since set, and the temperature had dropped from near 80 into the 40s. We passed through tiny pockets of warm air and frigid low points, the cold pooling as in a Fairbanks winter. We bombed down the pass, the longest descent of the trip, Trystan and I still in shorts. I started to shiver. My toes got painfully cold. I thought of Darcy's advice, and how sometimes you have to learn for yourself. I put on pants. 
We climbed again, and dropped, and climbed once more. We watched caribou glide over the tundra and moose lead tiny calves through the willows. We drank more coffee and waited for the sun.
The road turned to pavement, crested one last rise, and then we were home free. We coasted downhill, spooking a black wolf in the road, and reached our car just as the first tour buses headed into the park. A few minutes later, the sun crested some low clouds and shone down again.

Sunday, May 19, 2013

chicks

Ok, yes, these are ducks, not chickens. I feel bad about it, but I have been spending more time with the two ducks Ian and I got than the 13 chickens. Many of the chickens (chicks still, at 7 weeks?) are cute, and sweet, but they're harder to love. I don't know if it's the rubbery bill, or the floppy feet, or the plaintive quack, but everything the ducks do cracks me up. They love water. From the beginning, they dominated the shared waterer, splashing as much as they sipped; we made them a separate brooder to let the chicks drink in peace. Last night we gave them a tray of water. They drank it, waded into it, and within five minutes, immersed themselves completely. They are completely ridiculous.
I don't consider myself settled enough for pets -- I wouldn't even consider getting a dog -- but I heard an ad on the radio this spring for chicks at the Alaska Feed Company and suddenly wanted chicks. Ian's been wanting them for years. The ducks were just too cute to pass up. The ducks and a few of the chickens are straight run (unsexed), so we'll probably end up with some roosters and a drake, but the idea is to get eggs, ideally through the winter. 
Most people here try to make chickens pay -- they piece together a coop with scrap materials and consider the cost-per-egg after coop-building, feeding, and heating. We're taking a different approach. I wanted to try a passive-solar thermal mass building technique, and Ian was game. So our coop will be timber-framed, super-tight, well-ventilated, and heated in part (I hope) by a pile of hot rocks. 
First eggs should come in September. If the Cayuga (the black duck) is a hen, she will lay black eggs.

Monday, January 28, 2013

I've wanted this book for years, forgot about it, and was reminded recently when I thought I might like to study architectural drafting. I realized I wasn't interested in learning Autodesk Revit, apparently the new industry standard, which seemed too automated, and artless, but that I am still interested in architecture. In building my cabin, I loved the little design questions -- the ratios of rectangles, the rise and run of ladder steps, the dimensions most suited to using stock materials with little waste. They were puzzles, requiring aesthetic consideration, three-dimensional problem solving, and simple math. How high should a counter be? Go try some out.
I read something the other day by the big-thinking architect Christopher Alexander about how "a form should reflect all the known facts relevant to its design." He was arguing, in 1964, that increasingly complex design challenges were making this harder. My sense is that new design software allows one to bypass some of the design challenges, that the software contains the knowledge that's needed. I like the old school way, and I think that's why I built the way I did, with the most complex system in my cabin being the lock in my doorknob. I like to think I know all the facts relevant to, for instance, metal roofing: adequate sheathing and air flow underneath, enough eave to shed rain but not so much overhang that the metal could crumple under heavy snow.
If solving design problems appeals to me, maybe it's odd that I'm so excited about a book with all the answers. It tells you -- a counter should be 34-36 inches high, a doorway 80, a threshold no more than one. With tiny font and detailed drawings, over 785 pages, the book attempts to answer any question one might have: the proper depth of a swimming pool or reverberation timing of an auditorium. The possible uses of a Chinaberry tree, the design of a chimney, the size of a sousaphone, the installation of metal roofing. I can imagine a similarly encyclopedic book of anatomy, taxonomy, history, or law, but I think this is the one that most interests me. Maybe it's knowing the rules first so you can bend them later. Or that the book answers questions I never would have thought to ask.
It's also a beautiful work of design in itself. I chose the seventh edition, from 1981, out of a certain nostalgia and imagining -- correctly -- that the drawings would be nice. Since I am not an architect, I don't care about it being current, which it is not. It gives the height of typewriter tables, and it assumes the heel of a woman's shoe will be, on average, a half-inch higher than a man's. It includes new sections on energy-efficiency and solar power (ah yes, the first big oil crisis) and on accommodations for the handicapped. Its language has life, calling tall people "giants" and justifying its use of the metric system as "the most practical system of measurement ever devised."
Here then, are some things I've learned from the first eight pages.
3.5 percent of men and 0.2 percent of women are colorblind; 4.5 percent of adults are hard of hearing; over 30 percent wear glasses; 15 to 20 percent are handicapped, and 1 percent are illiterate. Left-handed people have increased in number to more than 10 percent.
The maximum temperature for warm air hand dryers is 140 degrees; non-metal handles can safely be much hotter than metal handles; water above 115 degrees will hurt you.
A man can push a heavier cart than a woman at first, but unless it's a typo, a woman can push more in the long run. I am smaller than 97 percent of men, and my arms are disproportionately short.
It's acceptable to design for 95 percent of the bell curve -- some outside it will adapt, others are excluded "to keep designs for the majority from becoming too complex and expensive."
A person's center of gravity is within the pelvic link, and a man's hips are almost an inch wider when he's sitting. It's best to work sitting straight up, but you can be alert at 5-20 degrees back; beyond that you're relaxing, reclining, or getting your teeth cleaned.
A manhole should be 22.8 inches, 36 if you're wearing a space suit. A hole to stick your finger through should be 1.3 inches; if you want to keep fingers out, it should be 0.3 inches. Four people marching single file will take up 138 inches. If they're singing in a choir, it's only 80 inches.
The sum of two risers and a tread on indoor stairs should be 25 inches; within a flight of stairs, it's OK if individual steps differ by up to 3/16ths of an inch.
Don't ask how I will ever use any of this.

Thursday, December 20, 2012

my new job

It's -44 today in Fairbanks, and I'm home from work for the third time this winter, the second time this week, because of the cold. Our cutoff is -40, although it's an inexact policy. A few weeks ago, we left Fairbanks in the high -30s to work in Delta Junction, where the first morning it was at least -41 and possibly -56. (The thermometer where we were working had bottomed out.) Cords broke on power tools, motors blew out, a truck froze up. One guy's glasses snapped at the bridge. Humans, I came to think, are one of the few things that continue to function well in extreme cold.
For the last four and a half months, I've been working as a weatherization technician for Interior Weatherization Inc., a non-profit that does the state-sponsored weatherization work in Fairbanks and road-accessible areas of the Interior. Our goal is the low-hanging fruit -- not necessarily the simplest fixes, but the ones that will offer the greatest savings for the investment. We replace a lot of inefficient boilers (subcontractors, actually), seal cracks in ceilings and around windows, and add insulation in attics and crawlspaces. We install bathroom fans to control humidity and ensure a healthy exchange of air.
Sometimes it's hard to understand how our work will help. And often, swimming through a sea of cellulose to seal holes in an attic, I curse the builder for not doing it right the first time. But mostly it's rewarding work with clear benefits. In a trailer, you can feel the difference on your skin between a slatted, single-pane window and the triple-pane windows we install. On a frigid day, it just feels right to blow 20 inches of fiberglass into an attic insulated with a thin layer of sawdust and foam packing peanuts. "I've never got a gift like that in my life," said one man after we insulated his attic, rebuilt the skirting around his foundation, and changed some light bulbs.
It's an incredibly generous project of the state, designed to save Alaskans money by making cost-effective improvements they couldn't otherwise afford. I like to think it helps the environment, too, by reducing energy consumption.
For me, it's a big shift from reporting on state politics. Some tasks require real focus, learned skills, and even creativity. But often it's pretty mindless. Which is not always to say simple -- there's a physical skill involved in stapling cardboard baffles to rafters while lying on ceiling joists in a tight eave. I guess that's one of the things I like about it.
I like the guys I work with, and the jobs I can do completely and well. I like blowing an attic for an elderly woman on her birthday. And I like, when a child asks what I'm doing, answering earnestly, "I'm making your house warmer."

a table

Finally, I have a table! 
I live in a small cabin, where space is tight enough that furniture has to multitask. My timber-framing sawhorses serve as seats, stepladders, and makeshift tables. Anything permanent is pushed to the walls, leaving an open space of about eight by eight feet. I've valued that space immensely. I can swing, or stretch, or lay down a tarp and butcher a moose.
My equivalent of the kitchen counter -- the place I spend nearly all my time, and where a guest would choose to sit -- is the wood stove (not at, but next to). It's an OK set up, but I guess there comes a time when a guy wants a table. I designed at least six in Google SketchUp, some bulky and stout, others with Scandinavian curves, most completely deconstructable. The one I finally made is Shaker-inspired, simple and light, and built with leftover rough-cut 2x6s and finished 1x6s. The frame does not come apart. Now, with the third coat of polyurethane drying, I'm almost ready to like it. My eye still fixes on the corner of the top that's not quite flat, but I haven't wanted to burn or otherwise destroy it like some things I've made that I've later come to like. I mostly eyeballed the shape, with some thought given to usage. When the paint is dry, I'll get to see if it's too wide for cribbage or too narrow for dinner with friends. I think it will be perfect for reading the paper with breakfast.
For crafty readers, an explanation: building a table seems to be a lot about keeping the legs vertical (and hence square). Two or four legs, you either need to brace them near the bottom or make the attachment to the top as sturdy as possible, usually with skirting, as I think it's called. I did the latter, and did it the old-fashioned way, with morticed legs and tenons on the ends of the skirting. (Fred Meyer and Pier One tables use diagonal braces screwed into the skirting and legs.) I glued the joints and tapped in pegs made from an oak dowel. There's no hardware in the frame. 
I read somewhere that the top should be attached in the middle (assuming the laminated planks run lengthwise) to allow movement with drying. I tried to build tension into the tabletop by giving it a slight convex arc, hoping to make the edges tight as I pulled the center down -- and because a slightly rounded tabletop seemed better than a slightly sunken one. The idea might have been sound, but my execution was a little sloppy (nothing is quite planar in my cabin, let alone regularly convex) and I needed a few more screws to hold the top tight.

Monday, November 26, 2012

resurrection pass

Finally I made it to Anchorage for Thanksgiving! For years, Toby and Darcy have skied the 41 miles over Resurrection Pass on Thanksgiving weekend with good friends and a full holiday meal. This was my first time joining the tradition. Seven of us started out from Hope, three of us skied all the way across, two joined from Cooper Landing. The snow was sometimes thin, the downhills fast and scary. But the sun was out, the skiing was fast, and the food and company couldn't be beat.

Monday, November 12, 2012

snowgo

I'd been on a snowmachine exactly twice before I bought one this fall, on a whim, for $600. The first time was several years ago at Arctic Man, a Burning-Man-like gathering for slednecks in the middle of the Alaska Range. The event is centered around a race involving speed skiing and snowmachines, but basically people go to hang out, drink, and ride around on anything with an internal combustion engine. Tens of thousands of people camp out in a glacial valley without even a payphone in the summer. They ride snowmachines up a mountain to watch the race.
I went as a reporter with the News-Miner. The paper rented one snowmachine for me and John, the photographer, and since he had more experience, he drove. His response to any threat -- of bogging down in deep snow, mostly -- was to gun it. Knowing what I know now, his instinct or training was probably right, but at the time it seemed like a jerky ride. After tipping over repeatedly on overworn trails, I tried driving and promptly tipped us over, camera gear, notebooks and all. The thing I remember most was struggling to breathe with the air fouled by a thousand two-stroke engines. 
The second time was last winter, testing out my friend Mark's new-used Polaris. I took it up to 30 miles an hour, nervous as ruts in the snow tugged at the skis. Ian took it up to 60.
I still consider snowmachines kind of stupid, at least for recreation. Moving under your own power is more rewarding, and while it won't get you as far, certainly allows for a deeper appreciation of the landscape, without any of the smoke and noise. "I'm not usually like this!" I wanted to tell the one hiker we passed on the trail this weekend in the White Mountains. (Mark and Ian and I went about 25 miles on Saturday, out on a mixed-use trail from Wickersham Dome until the ruts and tussocks and slush made the riding less fun.)
So why do it? I guess to experience something that's such a big part of Alaska life, used for hunting, trapping, and travel. To open the door for new explorations, or at least gain the skills to make them possible. 
And, I'll admit, it's pretty darn fun.

Wednesday, August 1, 2012

tracks

Can you see them?